WaterGuard Basement Waterproofing System in Delaware & Maryland
Keep your basement clean and dry, guaranteed with the non-clogging WaterGuard System.
Among the best basement waterproofing methods is a sub-floor drainage system installed along the entire perimeter of the basement floor. One of the challenges of this method are to keep the drain from being clogged by mud or silt. Many homes can go years without a water problem and then develop one due to the existing sub-floor drainage system clogging with mud. Another challenge is to make sure that the system accepts water from the walls without leaving a large gap at the edge of the floor that can collect dirt and debris, another potential for clogging the drain.
The patented WaterGuard system has a design that separates it from the soil under your floor so it will never clog. It also has a special wall flange that creates a neat space between the floor and the wall to drain any wall seepage, without allowing dirt and debris from the floor to enter.
The WaterGuard system is applicable to all types of foundations, including block, poured concrete, stone, etc. Weep holes are drilled into block walls to drain water out of the walls into the system. Water enters the WaterGuard system via holes on the wall side and flows in the WaterGuard conduit to a SuperSump sump pump or other drain system.
The WaterGuard system intercepts water at the perimeter of your basement and drains it unseen safely away - guaranteed! The system will keep your basement clean and dry so you can use the space for storage, recreational purposes, or to finish for additional living space.
Get a Free Basement Wall Crack Repair Consultation in Delaware and Maryland!
