Job Stories

What an incredible success story about a crawl space in Milford, DE. Worried about the moisture problem, this homeowner called the DryZone experts. The homeowner explained to DryZone that he was afraid the moisture in his crawl space would ultimately affect his HVAC system. DryZone was the best team to resolve the issue. The first order of business was to remove all the moisture in the space. Once the water was removed, the insulation was pulled out. The debris was removed, the ground was regraded and all the vents were blocked off from the inside of the crawl space. Before laying the CleanSpace Technology, drainage matting was installed for an added layer of protection against any groundwater seepage. The DryZone team then wrapped the entire space with CleanSpace including the piers. The final order of business was installing the EverLast door for maximum protection from outside elements. The homeowner couldn't believe his eyes! DryZone was to the rescue once more! Call DryZone today to schedule your FREE inspection and estimate!

A previous DryZone homeowner had a dehumidifier installed in their crawlspace. During routine annual maintenance, our Service Technicians explained that a full crawlspace encapsulation would further help control humidity levels. To address this, we sent out System Design Specialist, Derek, to conduct a free inspection.    Derek found that the humidity levels in the crawlspace were over 68% we;; above the recommended 55% threshold. After reviewing the available solutions, the homeowner decided to move with a full crawl space encapsulation.    Key components of this project included CleanSpace, HydroLink, and IceGuard. CleanSpace is durable 20-mil liner manufactured with seven layers a combination of high-density polyethylene for puncture resistance, low-density polyethylene for flexibility, and polyester cord reinforcement for superior tear resistance.    Thanks to this full encapsulation system, the Milford, DE homeowner can now enjoy peace of mind knowing their crawlspace is protected from excessive moisture. DryZone is proud to have helped another home on Delmarva. 

A homeowner in Milford, DE, was experiencing issues with sinking concrete on their porch and around the pool, creating tripping hazards. While researching options to replace the concrete, they discovered that DryZone offers a cost-effective alternative to lift and level the existing slabs.    Our System Design Specialist, Tom, conducted a thorough inspection and explained how our PolyLevel system could restore the safety and stability of the concrete.   This concrete lifting and leveling project included PolyLevel and NexusPro Crack Repair. PolyLevel is a high-density polyurethane foam that permanently lifts and stabilizes sinking concrete. Small, penny-sized holes are drilled into the slab, and a structural-grade polymer is injected into the voids beneath. As the material expands, it accurately lifts and levels the concrete. The installation can often be completed in just a few hours, with surfaces ready for use just 15 minutes after application.    With the addition of NexusPro to seal cracks and joints, this Milford, DE, homeowner can now enjoy peace of mind knowing their concrete is level, safe, and protected from future damage. DryZone is proud to provide long-lasting solutions that help homeowners across Delmarva protect their homes.     

A homeowner in Milford, DE, was dealing with a safety concern after their concrete porch began to sink, creating a serious tripping hazard. Worried that someone might get injured, they started researching solutions and initially considered replacing the concrete altogether. However, after learning more online, they discovered that DryZone offers a more cost-effective alternative.    Our System Design Specialist, Don, performed a thorough inspection and explained how our concrete lifting and leveling solution could resolve the issue. After reviewing the plan, the homeowner decided to move forward with the project.    This concrete repair involved two key products: PolyLevel and NexusPro Crack Repair. PolyLevel is a high-density polyurethane foam that lifts and stabilizes sunken concrete slabs. Small, penny-sized holes are drilled into the concrete, and the polymer is injected into the void beneath. As the foam expands, it raises the slab back to its original position with precision. NexusPro is then used to seal any cracks, protecting the concrete from future water intrusion and further damage.    Thanks to these innovative solutions, the Milford homeowner can now enjoy their porch without worrying about tripping hazards. DryZone is proud to provide effective, long-lasting concrete repair solutions for homeowners across Delmarva. 

John, of Milford, DE, was experiencing issues with tripping hazards on his front walkway. Looking for a solution that didn't require replacing concrete, he contacted the trusted experts at DryZone to schedule a free inspection. Our System Design Specialist, Jamie, conducted a thorough inspection and found that the concrete slab beneath the brick had started to sink, causing it to become uneven. After discussing the solutions we offer to lift and level concrete, John decided to move forward with the project.    The primary component of this concrete lifting and leveling project was PolyLevel. PolyLevel permanently lifts and stabilizes sinking concrete slabs using a high-density polyurethane formula. Small, penny-sized holes are drilled into the slab, and a structural-grade polymer is injected into the void. The expanding properties of the polyurethane allow for precise lifting and leveling. PolyLevel can often be installed in just a few hours, with the slab ready for use after only 15 minutes.    Thanks to this solution, John can now enjoy peace of mind knowing his walkway is safe and free of tripping hazards. DryZone is proud to provide solutions that protect homes across Delmarva. 

These homeowners knew that their crawl space was bad. The odors and standing water were a clear message to them that they had a problem on their hands, they just didn't know what to do about it. One day, a conversation with their neighbor helped them see clearly what they should do. Their neighbor had been struggling with similar issues but called DryZone. The difference that DryZone had made in the neighbor's crawl space was exactly what these homeowners were looking for. A call to DryZone was all it took to get a free crawl space inspection. This inspection revealed the full truth about the impact that this crawl space was having on their home. The inspector from DryZone encountered VERY high humidity levels, both in the air and in the wood of the home. The exterior humidity on that day was 74% while the crawl space humidity was nearly 81%. But that isn't the worst of the story. Continuous high humidity in the air was impacting the wood joist which help up the home. The wood humidity read a shocking 29.1%! This is double what it should be! Thankfully, DryZone had the right solution at just the right time. The HydroLink Drainage system in tandem with the TripleSafe Sump Pump will control that standing water for the homeowners for years to come - even during storms! The TripleSafe provides efficient water removal during normal water incursion, while the additional pump kicks in during heavy rainfall events.  CleanSpace with Drainage Matting, along with blocking the vents and of course, a SaniDry Sedona dehumidifier will keep the air, and the wood, nice and dry.   These homeowners are enjoying a much improved living environment. High humidity can damage homes and health and we are glad that they had a good neighbor to show them the best solution was a call to DryZone. 

This homeowner in Georgetown, DE called DryZone to finally fix their front porch area made of concrete. After tripping several times, they wanted an immediate fix to their issue.  With our product PolyLevel, we were able to lift the concrete back to its original location, safe for all!

High moisture content in his crawlspace led this Georgetown homeowner to DryZone. After wrapping the area in CleanSpace, a SaniDry Sedona dehumidifier was added to keep the air dry. For any other added moisture problems, a TripleSafe sump pump was installed to remove any water that comes in. 

Standing water and a leaking crawl space entrance made this crawl space a constant pond. Over time, it seemed the ground was never dry and the brick foundation always had water stains. This homeowner needed a solution to keep their crawl space dry and block any leaking water from affecting their foundation in the future.  A crawl space encapsulation from DryZone seals the crawl space away from the outside and protects the wooden floorboards underneath. The water gets drained into a sump pump and forced far away from the foundation to ensure it stays leak-free. 

This Georgetown Homeowner is renovating their basement. They currently have cracks in the foundation and active water flow. They called us to come in and correct the issues prior to finishing their basement.