DryZone, LLC Before & After Photos

We have done repair work for this homeowner in the past, so they knew they could reach out to us to get the job done. They noticed some wall cracks in their basement walls and want to have them repaired before there is any chance of water coming through and flooding the basement. We will use FlexiSpan to fill and seal all cracks to ensure the area stays clean and dry. This provides a permanent solution to their problem, giving them confidence their basement will stay water free.

This homeowner found a few cracks in the unfinished portion of their basement behind the garage foundation wall. We used FlexiSpan to fill and seal the crack permanently, as well installed ice guard on their discharge line so water does not freeze in it.

This homeowner has a very expensive Geo-Thermal System under their home. It is currently not protected by any encapsulation system, which is why they reached out to us. We are going to be using our CleanSpace encapsulation system in order to protect the area.

It was also pointed out to us that there are 2 wooden posts that are holding up a beam. These posts are sitting on blocks which have sunken into the ground. We recommended removing that and replacing it with our Smart Jacks to ensure the stability and safety of the foundation.

This homeowner recently bought this home and knew they had to have a waterproof system added to ensure that no damage occurs in the future. They gave us a call to come out and take a look. We are going to put in a full waterproofing system to make sure no water damage can occur. 

We will also be installing a brand-new egress window as well.

The homeowner found water coming into their finished basement. Once they opened up the wall, they found a leak that looked to have been fixed in the past but had failed. They also found a separate crack in another spot they are wanting to fix as well.

FlexiSpan® crack repair is actually a three-part process that begins with the application of a flexible sealant along the full length of the crack. Next, a strip of flexible and porous foam is installed over the crack.

Finally, an impermeable membrane is adhered to the wall on both sides of the foam strip.